The ZK-PP2K Manual Author: [Your Name/AI]
The does not work stand-alone for payroll. It must communicate with ZKTeco’s PC software: ZKTime 5.0 , BioTime 8.0 , or third-party software via SDK. The manual assumes you use ZKTime.
Set to PULSE mode, set P+ (on time), P- (off time), and N (number of pulses).
This device is a standalone biometric access control and time attendance terminal. It supports multiple verification methods including Fingerprint, Face (on select models), and RFID Card. It is designed to work in "Standalone Mode" (storing data locally) or "Network Mode" (sending data to a server via Pull/Push protocol).
Keep this Zk-pp2k Manual bookmarked. If you treat the unit with care—respecting the 150W limit and ensuring active cooling above 3A—it will serve you for years as a bench power supply, battery charger, and LED driver.
The ZK-PP2K solves various electronic and mechanical testing needs.
The ZK-PP2K is a dual-mode (PWM and Pulse) signal generator and motor driver module operating at 3.3V–30V, capable of driving loads up to 8A (150W) for motor, valve, or LED control. It features an LCD display, a MOS switch output, and precise control over frequency (1Hz–150kHz) and duty cycle (0–100%). For the full, original technical manual, visit ledsales.com.au ledsales.com.au
The ZK-PP2K Manual Author: [Your Name/AI]
The does not work stand-alone for payroll. It must communicate with ZKTeco’s PC software: ZKTime 5.0 , BioTime 8.0 , or third-party software via SDK. The manual assumes you use ZKTime. Zk-pp2k Manual
Set to PULSE mode, set P+ (on time), P- (off time), and N (number of pulses). The ZK-PP2K Manual Author: [Your Name/AI] The does
This device is a standalone biometric access control and time attendance terminal. It supports multiple verification methods including Fingerprint, Face (on select models), and RFID Card. It is designed to work in "Standalone Mode" (storing data locally) or "Network Mode" (sending data to a server via Pull/Push protocol). Set to PULSE mode, set P+ (on time),
Keep this Zk-pp2k Manual bookmarked. If you treat the unit with care—respecting the 150W limit and ensuring active cooling above 3A—it will serve you for years as a bench power supply, battery charger, and LED driver.
The ZK-PP2K solves various electronic and mechanical testing needs.
The ZK-PP2K is a dual-mode (PWM and Pulse) signal generator and motor driver module operating at 3.3V–30V, capable of driving loads up to 8A (150W) for motor, valve, or LED control. It features an LCD display, a MOS switch output, and precise control over frequency (1Hz–150kHz) and duty cycle (0–100%). For the full, original technical manual, visit ledsales.com.au ledsales.com.au