V2ray Mikrotik -

Mark the connections that match the address list.

To configure your MikroTik router as a V2Ray client, we will need to set up a virtual network for the container, define specific routes, and configure firewall rules to direct traffic through the proxy.

: Create a veth (virtual ethernet) interface and a bridge to connect the container to the router's internal network. v2ray mikrotik

V2Ray runs in a Docker container, requiring hardware that supports the container package (e.g., hAP ax2/ax3, RB4011, RB5009).

Because RouterOS (MikroTik's operating system) does not natively support the V2Ray protocol, attempting to run complex proxy tools directly on the router can degrade performance. This comprehensive guide details how to build a highly scalable, high-performance network-level proxy system using a MikroTik router and a V2Ray gateway. Architecture Overview: The Two-Box Solution Mark the connections that match the address list

If your MikroTik router has an older MIPS architecture or limited RAM, running containers locally will crash your system. The cleanest workaround is to offload the V2Ray decryption processing to a secondary cheap device (like a Raspberry Pi, mini-PC, or local server) and use your MikroTik to manage the intelligent network paths. Step 1: Set Up the External Proxy Server

Separate USB storage or formatted disk space (highly recommended to save router flash life). Step 1: Enable Container Support V2Ray runs in a Docker container, requiring hardware

Here are the key features of using :

Tunnels add overhead. If web pages fail to load or get stuck, change your MSS clamping rule on the MikroTik mangle table to reduce packet size down to 1360 .