Use two wrenches to disconnect the helium supply line from the adsorber. Unbolt the old adsorber from the chassis and slide it out.
(active charcoal) to ensure gas purity before returning to the cold head. Safety Interlocks
Adhering to a rigorous checklist before each use is essential for safety and reliability. sumitomo f50 compressor manual new
Silas rolled his eyes. "It’s a compressor, boss. In goes air, out goes pressure."
Ensure a stable power line with a minimum capacity of 9 kVA (12 kVA recommended). Warning: Never use a power inverter as the main electrical supply source. Use two wrenches to disconnect the helium supply
Navigate to the official Sumitomo SHI Compressor website (formerly known as Sumitomo Heavy Industries Industrial Equipment). Look for the "Support" or "Download Center" section. You will typically need the following to access the correct manual:
: Covers specialized SH-series specifications, site requirements, and control methods. F-50H Compressor Unit Technical Manual Safety Interlocks Adhering to a rigorous checklist before
: Typically 6.5–7.2 kW at 50 Hz and 7.5–8.3 kW at 60 Hz. Operating Pressures :
The F-50 comes in low-voltage (F-50L) and high-voltage (F-50H) versions to fit different electrical setups. Specification 6.5 to 7.2 kW (50 Hz) / 7.5 to 8.3 kW (60 Hz) Electrical Supply (F-50L) 3-Phase, 200 V, 50/60 Hz Electrical Supply (F-50H) 3-Phase, 380/400/415 V (50 Hz) or 460/480 V (60 Hz) Static Gas Pressure 1.45 to 1.65 MPa at 20°C (depending on the cold head) Cooling Water Flow 7 to 10 Litres per minute Dimensions (H x W x D) 591 mm x 450 mm x 585 mm Total Weight 120 kg (264 lbs) Maintenance Cycle Every 30,000 hours of operation Unboxing and Site Requirements
The is a mid-sized, water-cooled, three-phase helium compressor designed to power cryocoolers and pulse tubes. For the most recent technical documentation, the F-50H Compressor Technical Manual and the F-50L Technical Manual provide updated specifications and maintenance guidelines. Technical Specifications
A: Contact Sumitomo distributor for export markets. The new export version (Part Number usually ending in -EN) includes both languages side-by-side.