: Click "Choose" and select the scatter text file from your firmware folder.
Click on the button next to the Scatter-loading File field.
But the real treasure was the full flash dump:
This is usually a driver issue. Reinstall the MTK VCOM drivers, try a different USB port (preferably a USB 2.0 port on the back of the PC), or try a different USB cable. coolpad cp03 dump firmware android 11 scatter filezip
Before beginning the flashing process, prepare your environment to prevent permanent damage (bricking) to your smartphone.
The roadmap that tells the flashing tool where to write each partition.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. : Click "Choose" and select the scatter text
Once you see the success message, it is safe to close the software and configure your phone: Disconnect the USB cable from your Coolpad CP03.
[PC] --> (Auth Bypass Tool) --> [SP Flash Tool] --> (USB Cable) --> [Coolpad CP03 (VCOM Mode)] Step 1: Extract the Archive
(v5.1924 or newer is often recommended for modern MTK chips). Loading Scatter: tab and click Scatter-loading . Select the MT6769_Android_scatter.txt file from your extracted firmware folder. button in the tool. Connection: Power off your device. While holding the Volume Down Reinstall the MTK VCOM drivers, try a different
Verify the scatter file corresponds strictly to the CP03 model.
For the Coolpad CP03, this firmware is packaged as a .zip file containing a MediaTek scatter file. The scatter file acts as a map, instructing the flashing tool exactly where to write each system image onto the device's physical eMMC or UFS storage chip. Technical Specifications Coolpad CP03 Processor: MediaTek (MTK) Chipset Android Version: Android 11 File Type: Scatter ROM / Dump Firmware Archive Format: .zip Prerequisites and Requirements
Flashing a factory dump will completely erase your internal storage. Back up all photos, contacts, and documents.
Extract the firmware zip file using WinRAR or 7-Zip. You should see a folder containing the Scatter file (usually named MT6739_Android_scatter.txt or similar) and the partition images.