Manual | Chevron Digital Timer Ew-32 User

While still holding CLOCK , press the to set the current hour. Ensure you check the AM or PM indicator if using the 12-hour format.

Repeat steps 2, 3, and 4 to set the exact day(s), hour, and minute you want the appliance to shut off.

Accurately setting the current time is a fundamental first step. The process usually involves setting the clock and then adjusting for AM/PM or a 24-hour format. However, it is important to note that the exact button sequences can differ between timer models. Based on the closest available instructions for a digital timer with the EW-32 number, follow these steps: chevron digital timer ew-32 user manual

Turn on the main power. The LCD display should illuminate. 4. Programming the Chevron EW-32

A: Yes, if the pump is 115V and draws less than 15A. However, keep the timer dry—install a weatherproof cover. While still holding CLOCK , press the to

(based on common programmable outlet timers):

Verify your day combinations match exactly for both the ON and OFF phases of the program. Accurately setting the current time is a fundamental

Overrides or recovers a programmed schedule.

To ensure your scheduled programs trigger at the correct moments, you must first set the master clock. Step-by-Step Clock Configuration Press and hold the button.

Press a second time if you wish to restore that program's previous time settings. 5. Understanding Operating Modes: Manual Override

: Press the UP or TIMER button. "1 ON" will flash, indicating the first activation time. Set On-Time :